Licensed & Insured, in Columbus and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Columbus
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (380) 800-5621 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Columbus and surrounding areas · On-site visits included · Free estimate within 24h
Columbus Metal Roofing is a team of local certified professionals based in Columbus. We respond quickly in Columbus and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (380) 800-5621⭐⭐⭐⭐⭐ 4.9/5 · 217 verified Google reviews
“Our old hay barn had rust holes everywhere and we figured the roof was a goner. Columbus Metal Roofing tore off the failing panels, fixed the purlins that needed attention, and put on new ribbed panels over the whole 60x40 barn in about three days. The crew even swept the gravel clean of every last screw before they left.”
Commercial & Agricultural Metal Roofing
“We wanted a real copper roof over the front entry and had a hard time finding anyone around here who would even quote it. These guys did the soldered seams and custom flashing around the columns beautifully, and it's already starting to patina the way we hoped. Not cheap, but worth every penny.”
Copper & Specialty Metal Roofing
“The red barn on our property had a rusted-through steel roof, and I was worried nobody would want to tackle a rural job like this. They replaced all the panels, redid the flashing around the cupola, and it looks better than it has in 30 years. Two guys, two and a half days, and they hauled off every scrap of the old metal.”
Metal Roof Replacement
“After two summers of patching our old asphalt shingles, we finally pulled the trigger on a standing seam roof for the house. The crew was in and out in four days, and the dark bronze finish looks fantastic against the brick. Only small gripe is they left a few metal shavings in the flower beds that I had to pick up.”
Standing Seam Metal Roofing
“We had a terrifying sheet of snow slide off our metal roof last winter and nearly take out the gutters. Columbus Metal Roofing installed snow guards across the whole front slope in a single afternoon, and they matched the color to our panels perfectly. Now I can actually relax when it snows.”
Snow Guards & Ice Protection
“Straightforward, professional, no surprises. They installed a new metal roof on our 1,800 square foot ranch, kept the yard tidy the whole time, and the final price matched the quote to the dollar. Would use them again without hesitation.”
Metal Roof Installation
“We wanted that Tudor look but with something that would actually last, so we went with stone-coated steel and I'm so glad we did. The crew worked around our schedule, kept the original half-timber detail intact, and the finished roof looks like real shake from the street. My neighbors keep asking who did it.”
Stone-Coated Steel Roofing
“We were dreading a full tear-off on our new build's existing shingle roof, but they did the retrofit right over the top and saved us thousands. The install was clean, the flashing around the chimney is tight, and the gutters they added for the metal roof handle the runoff perfectly. A couple of the crew members were a bit loud with the music, but honestly the work speaks for itself.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in Columbus · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel roof | Starting at $8/sq ft | Includes tear-off, underlayment, panels and trim; pitch and deck condition move the price. |
| Standing seam metal roof | Starting at $14/sq ft | Concealed fasteners and fabricated trim; roof complexity and panel length drive the number. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Includes profile panels, underlayment and flashing; historic detail work raises the cost. |
| Retrofit over existing shingles | Starting at $10/sq ft | Includes preparation and new metal over one sound layer where local code allows. |
| Complex or large-scale job | On estimate | Steep pitch, multiple valleys, historic districts and tall homes need an on-site look first. |
| Estimate | Free | Response within 24 hours at (380) 800-5621, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, standard gable | Starting at $10/sq ft | Includes panels, concealed clips, underlayment and basic trim on a straightforward roof. |
| Mechanically seamed standing seam | Starting at $13/sq ft | Double-locked ribs for high-wind exposure, steep gables and long panel runs. |
| Complex or historic home installation | On estimate | Dormers, valleys, multiple chimneys and historic district review need an on-site look. |
| Retrofit over existing shingles | On estimate | Depends on existing layer count, deck condition and local code limits on recover. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment and new panels, with price rising on steep pitch or multiple old layers. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and raised seams, with cost driven by roof complexity, panel gauge and color finish. |
| Metal shingle or stone-coated steel | Starting at $13/sq ft | Includes profile-matched panels and trim, with historic or HOA design review adding planning time. |
| Complex or large-scale roof | On estimate | Steep multi-plane roofs, copper accents, chimney rebuilds and tight tree cover need an on-site look first. |
| Travel | Included | In Columbus and surrounding Franklin County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (380) 800-5621, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener retrofit over shingles | Starting at $7/sq ft | Includes slip sheet, new trim and fasteners over one layer of sound shingles |
| Standing seam retrofit over shingles | Starting at $11/sq ft | Concealed fasteners and raised seams, priced higher for material and trim work |
| Metal shingle or stone-coated retrofit | Starting at $10/sq ft | Stamped or stone-coated panels that mimic the original roof profile |
| Deck repair during retrofit | On estimate | Soft or rotted sheathing found during inspection is priced per sheet replaced |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak or flashing repair | Starting at $450 | Includes leak trace, reseal or flashing rebuild and water test on one area |
| Panel replacement (1 to 3 panels) | Starting at $750 | Matching panel, closures and sealant included; pitch and access move the price |
| Fastener replacement run | Starting at $600 | Pull, inspect and replace gasketed screws on an exposed-fastener roof section |
| Storm or hail damage documentation | Included with repair | Photos, measurements and written scope for your insurance adjuster |
| Complex or large-scale repair | On estimate | Multi-panel, valley or historic detail work needs an on-site look first |
| Estimate | Free | Response within 24 hours at (380) 800-5621, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard leak trace and fastener repair | Starting at $450 | Includes full leak trace, failed fastener replacement and water test to confirm the fix |
| Flashing or pipe boot repair | Starting at $650 | Rebuilds counterflashing or pipe boot with proper laps, price rises with chimney height and access |
| Panel section replacement | Starting at $900 | Cuts out and matches damaged panel, cost rises with profile rarity and color match difficulty |
| Emergency tarping and response | Starting at $550 | Temporary weatherproofing after storm or ice damage, urgent after-hours calls carry a premium |
| Complex or multi-point leak | On estimate | Multiple entry points or hidden water paths need an on-site inspection before we quote |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (under 50 screws) | Starting at $750 | Includes inspection, chalk-marking, replacement screws and UV-rated washers on a single-story roof. |
| Full field re-screw (residential) | Starting at $1,450 | Covers full roof walk, pull-and-replace of all failing fasteners and washer upgrade; square footage moves the price. |
| Steep or multi-story roof | Starting at $2,200 | Higher pitch, multiple ladder setups and complex access add labor hours to the same fastener count. |
| Commercial or agricultural building | On estimate | Larger square footage, panel height and equipment access require an on-site look before quoting. |
| Travel | Included | in Columbus and surrounding Franklin County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (380) 800-5621, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, basic garage or shed | Starting at $5.50/sq ft | Includes panels, fasteners, closures and basic trim on a simple roof. |
| Ribbed R-panel roof, home or workshop | Starting at $7.25/sq ft | Includes underlayment, eave trim and ridge closures; pitch and height move the price. |
| Panel over existing shingles (retrofit) | Starting at $8.50/sq ft | Includes purlins and panels; existing layer count and deck condition affect the quote. |
| Repair or re-fastening of panel roof | Starting at $450 | Includes resealing, replacing damaged panels and resetting fasteners; leak count drives scope. |
| Complex or large-scale panel job | On estimate | Steep pitches, historic review, multiple buildings or heavy deck repair need an on-site look. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard gable | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and flashing; simple roof geometry keeps it at the low end |
| Metal shingle roof, complex or steep | Starting at $12/sq ft | Hips, valleys, dormers, and steep pitches add labor; staging and access drive the increase |
| Retrofit over existing shingles | Starting at $8/sq ft | Skips tear-off where code allows; deck condition and existing layer count affect the final figure |
| Deck repair or replacement | On estimate | Soft sheathing, skip sheathing, and rot need an on-site look before we quote the repair |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard profile | Starting at $9/sq ft | Includes tear-off, underlayment, panels and standard flashing on an accessible roof |
| Slate or shake profile match | Starting at $11/sq ft | Premium textured profile for historic district and HOA homes, priced by roof complexity |
| Low-pitch ranch and Cape Cod | Starting at $10/sq ft | Includes deck inspection and ice and water shield at the eaves and valleys |
| Complex roof with valleys and dormers | On estimate | Steep pitch, multiple penetrations and chimney flashing need an on-site look first |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay accent roof | Starting at $20/sq ft | Includes flat-lock or standing-seam panels, underlayment, and new flashing at the wall junction. |
| Full standing-seam copper roof | Starting at $32/sq ft | Includes concealed clips, soldered valleys, and custom chimney flashing; pitch and access move the price. |
| Zinc or aluminum specialty panels | Starting at $24/sq ft | Includes formed panels and matte finish; complex curved bays and dormers add fabrication labor. |
| Custom fabrication and flashing | On estimate | Curved bays, half-round gutters, and chimney crickets need an on-site template before we quote. |
| Travel | Included | In Columbus and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot repair and recoat | Starting at $2.50/sq ft | Covers cleaning, spot priming, and localized coating on sound panels with light fade. |
| Full acrylic coating system | Starting at $3.50/sq ft | Includes pressure wash, rust treatment, primer, and two finish coats on standard panels. |
| Urethane coating system | Starting at $4.50/sq ft | Longer-life topcoat for high-visibility roofs, priced higher for material and prep. |
| Rust-heavy corrugated or barn roof | On estimate | Heavy rust and fastener replacement require an on-site look before pricing. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pipe boot and vent seal replacement | Starting at $600 | Includes pulling the failed boot, installing a new seal and water-testing the penetration. |
| Step and apron flashing repair | Starting at $850 | Covers re-setting or replacing step flashing along a sidewall or chimney base. |
| Chimney counter-flashing rebuild | Starting at $1,400 | Includes cutting a reglet, new metal, sealant and basic tuckpointing at the joint. |
| Skylight curb and flashing rebuild | Starting at $1,800 | Covers curb repair, new flashing kit and re-setting the unit watertight. |
| Custom valley or cricket fabrication | On estimate | Complex geometry and copper work need an on-site look before pricing. |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pad snow guards, single slope | Starting at $1,200 | Covers a typical residential slope with clamp-on or screw-mounted pads, sealed fasteners, and cleanup. |
| Snow rail system | Starting at $1,800 | Continuous rail for steep pitches and long runs over driveways, priced by linear foot installed. |
| Ice-dam edge protection | Starting at $950 | Eave-edge detailing for low-pitch roofs with a history of ice damming and gutter backup. |
| Complex or large-scale job | On estimate | Multi-story gables, historic districts, and roofs needing repair first require an on-site look. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic walk with photos, plus a written repair-or-replace recommendation and insurance documentation. |
| Fastener and minor flashing repair | Starting at $350 | Replace sheared or backed-out screws and reseal small flashing joints; price moves with roof pitch and access. |
| Panel section replacement | Starting at $900 | Cut out and replace a damaged panel run with matching profile and color; panel type and roof height move the number. |
| Flashing and ridge cap rebuild | Starting at $1,200 | Rebuild chimney, skylight or valley flashing and replace bent trim; complexity of the penetration drives the cost. |
| Widespread storm damage | On estimate | Multiple panels, full slopes or structural damage need an on-site look and a documented scope before pricing. |
| Estimate and documentation | Free | Response within 24 hours at (380) 800-5621, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Visual inspection with photo report | Free estimate | Ground and roof-level visual check with photos and a written summary of defects found. |
| Fastener and seam diagnostic | Starting at $250 | Torque check on screws, seam probe, and clip inspection, priced by roof size and panel type. |
| Leak trace and moisture check | Starting at $350 | Attic inspection, moisture readings, and targeted water testing at suspect flashing and penetrations. |
| Pre-purchase or insurance report | On estimate | Full written report with photos and service-life opinion, scoped after we see the roof and access. |
| Travel | Included | In Columbus and surrounding Franklin County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book the inspection. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless 5-inch K-style gutter | Starting at $9/linear ft | Includes on-site roll forming, hidden hangers, and standard downspouts; run length and roof height move the price. |
| Seamless 6-inch K-style gutter | Starting at $12/linear ft | Higher capacity for long panel runs and steep roofs; outlet count and access add to the rate. |
| Half-round gutter on historic homes | Starting at $16/linear ft | Traditional profile for Victorian and copper roofs; fascia condition and custom brackets affect the final figure. |
| Leaf guards and oversized outlets | Starting at $4/linear ft | Screens and larger outlets for homes under heavy leaf drop; tree cover and roof pitch drive the cost. |
| Fascia and soffit repair | On estimate | Rot, ice-dam damage, or loose fascia needs an on-site look before we can give a firm number. |
| Travel | Included | In Columbus and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn and agricultural roof repair | Free estimate | Includes roof and fastener inspection, with price driven by roof size, access and number of screws or panels to replace |
| Exposed-fastener panel installation | Starting at $4.50/sq ft | Includes panels, screws, closures and basic flashing, with price moving on gauge, pitch and deck condition |
| Standing seam commercial installation | Starting at $9.00/sq ft | Includes concealed-fastener panels and flashing, with price driven by panel profile, height and complexity of details |
| Metal over shingles retrofit | On estimate | Requires an on-site look at deck condition and existing layers before a number makes sense |
| Travel | Included | In Columbus and surrounding counties, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (380) 800-5621, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Columbus need a crew that understands what central Ohio weather does to a roof. Columbus Metal Roofing is that local resource: a network of licensed, bonded, and insured contractors who handle metal roof installation, replacement, re-roofs, and repair on homes across the city and surrounding areas. We work on steep gabled roofs in Clintonville and Upper Arlington, low-pitch ranches in Linden and the Hilltop, and newer subdivisions in Dublin, Westerville, and Hilliard, plus the historic brick homes of German Village and Victorian Village.
This is a four-season climate with real consequences for metal: spring hail and straight-line wind, wet leaf-filled falls, and freeze-thaw winters that work fasteners and flashing loose. Add a large stock of aging screw-down roofs now 15 to 30 years old, and you get the failure pattern we see most. Whether you need a metal roof repair or a full replacement, we give straight guidance on repair versus replace, coating versus new panels, and standing seam versus exposed fastener. Call (380) 800-5621 to schedule an inspection.
Most metal roof leaks in Columbus trace to a handful of predictable failures. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once the washer fails, water reaches the screw shank and the hole widens. Seams separate as panels expand and contract through hot summers and cold winters. Pipe boots, chimney flashing, skylight curbs, and valley metal fail at sealant joints. Wind lifts and peels panels after thunderstorms, and fallen limbs puncture panels and dent ribs.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so the stain on your ceiling may sit many feet from the actual gap. By the time it shows, you can have rotted sheathing and saturated insulation. That is why we inspect the whole roof assembly, not just the wet spot. If the panels and seams are sound, a full screw replacement and re-fastening with new washered fasteners often restores a watertight roof for a fraction of replacement cost. If panels are perforated or the deck is soft, we will tell you plainly that replacement is the better money.
For active leaks, separated seams, flashing gaps, or storm damage, call (380) 800-5621. We handle metal roof leak repair, flashing and chimney work, and storm and wind damage repair. You get an honest repair-versus-replace recommendation in writing, with no pressure and no storm-chaser tactics. If a repair will hold, we say so.
We install the full range of metal systems and match the roof to the home, the pitch, and the budget. Standing seam metal roofing uses concealed clips and hidden fasteners for a clean, premium roof with no exposed screws to maintain. Corrugated and ribbed panel roofing is the economical workhorse for barns, workshops, porches, and budget-minded homes. We also install metal shingles, stone-coated steel, and copper and specialty metal for accents, bays, and porch roofs.
The honest comparison: standing seam costs more up front and has no exposed fasteners to service, while screw-down costs less and needs its fasteners checked and replaced over its life. When the deck is sound, metal roof over shingles (retrofit) is a legitimate way to save on tear-off and disposal. When the deck is soft or layered, tear-off is the right call. We will tell you which applies to your roof.
Metal roofing is typically quoted per square foot for installations, while repairs are often flat-rate. Your price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Expect typical ranges rather than a single number, and remember that final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a realistic ballpark, see our pricing page, then request a free estimate or free roof inspection. We will show you where the money goes and whether a repair, coating, or replacement is the better value for your home.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent. Coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we find and leave the claim decision to you and your insurer.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and fees and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Columbus building or planning department before starting your project. To schedule an inspection or ask a question, contact us.
Ready to get started? Columbus Metal Roofing serves in Columbus and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Columbus · Response within 24h · No commitment · ☎ (380) 800-5621
Your Free Quote Request