Serving the Columbus area  ·  (380) 800-5621  ·  Open Mon-Sun 7am-7pm
📞 (380) 800-5621 Free Quote

Metal Roofing in Westerville, OH (43081) · Local Professionals

Columbus Metal Roofing · Fast response in Westerville and the Columbus area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+217Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Westerville is a city where century-old brick storefronts uptown sit a few miles from 1990s subdivisions off Polaris Parkway, and the roofs above them face the same central Ohio weather. From the tree-lined streets near Otterbein University to the newer builds in the 43081 ZIP code, homeowners here deal with snow, ice dams, and spring hail that punish shingles and test metal alike.

We are Columbus Metal Roofing, and we have worked on Westerville roofs long enough to know the difference between a quick patch and a permanent fix. Whether you are in a historic uptown home with a steep gable or a north-side colonial with a low-slope porch, our team shows up with the right panels, fasteners, and flashing details for the job.

Metal Roofing in Westerville (43081)

Westerville sits on the flat glacial till plain of Franklin County, and that means two things for roofing: water drains slowly across broad lots, and the freeze-thaw cycles in winter work fasteners and flashing loose. Uptown Westerville has older homes with steep roofs and narrow side yards, so staging materials and getting a ladder truck in can be tight. North of Schrock Road, the 1990s and 2000s subdivisions have wider lots but strict HOA rules on panel profile and color. And anywhere near the Alum Creek corridor, mature maples and oaks drop leaves that fill valleys and gutters, which is a common cause of ice dams at the eaves.

Our team has installed standing seam, metal shingle, and stone-coated steel across Westerville and the surrounding Columbus area. We know which profiles pass HOA review, how to flash a chimney on a 1920s brick home without cracking mortar, and why screw replacement on a corrugated panel is often the difference between a leak and a dry ceiling. We are fully insured with general liability and workers' compensation, and we pull permits through the City of Westerville before any replacement or re-roof.

Our services in Westerville

How a Job Works in Westerville

Step 1: You call us at (380) 800-5621 or request a free estimate online. We schedule an on-site assessment, walk the roof and attic, check flashing and fasteners, and talk through your options. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we handle the permit with the City of Westerville and coordinate any HOA design review. On tight uptown lots, we stage materials in the driveway or on the street per city rules. Our crew removes the old roof, inspects the deck, and installs the new metal system with the right underlayment, ice and water shield at the eaves, and snow guards where needed. Most residential roofs take two to four days depending on size and weather.

Step 3: We clean up every nail and scrap, run a magnet over the lawn and driveway, and walk the finished roof with you. You get a final inspection sign-off and a written warranty. We leave your property as clean as we found it, or cleaner.

Pricing in Westerville depends on roof size, pitch, access, and the condition of the deck and flashing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot, though code limits how many layers you can cover. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs start at $9 per linear foot. We give free estimates and free inspections, so call (380) 800-5621 and we will put real numbers on your specific roof.

My uptown Westerville home has a steep slate roof and narrow side yard. Can you still install standing seam?
Yes. We have worked on steep roofs and tight lots throughout uptown Westerville and near Otterbein. We use ladder hoists and careful staging, and we often plan the panel lengths to avoid blocking the sidewalk or driveway. The steep pitch actually helps with snow shedding, but we add snow guards above walkways and doors so ice does not slide off in sheets.
A storm just peeled back panels on my roof in Westerville. How fast can you respond?
We prioritize active leaks and storm damage in Westerville and the surrounding area. Call (380) 800-5621 and we will schedule an inspection, usually within one to two business days, and sooner for active leaks. We can tarp or secure the roof to prevent further damage, then provide a written repair estimate and work with your insurance documentation if you are filing a claim.
What does a metal roof cost for a typical Westerville 43081 home?
Most Westerville homes fall in the $8 to $12 per square foot range for installation, depending on panel type and roof complexity. A 1,500 square foot ranch might run $12,000 to $18,000 for standing seam, while a larger two-story colonial could be $20,000 to $30,000. Repairs start at $450. We give free on-site estimates so you get a real number, not a guess.
Do I need a permit for a metal roof replacement in Westerville?
Yes, a full replacement or re-roof typically requires a permit through the City of Westerville Building Department. Fees and inspection requirements vary, and we verify current rules before we start. If your home is in a historic district or subject to HOA design review, we also help coordinate that approval so your panel profile and color are accepted.
My HOA requires approval for a metal roof. Can you help with that process?
We can. Many Westerville subdivisions have design review rules that restrict panel profile, color, and sometimes even the type of metal. We provide product samples, specifications, and installation details for your HOA submission, and we have worked with boards across the north side. If there is a property line question with a neighbor, we follow city setback rules and keep the work within your lot.
Are you insured for work at my Westerville property?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you if anyone is injured on the job or if property is damaged, and it is a standard part of our paperwork for every Westerville project.
What maintenance does a metal roof need in Westerville's climate?
Central Ohio freeze-thaw cycles are the main issue. We recommend an annual inspection, especially after winter, to check fasteners, sealant, and flashing. Keep gutters and valleys clear of leaves from the maples and oaks, because debris holds moisture and contributes to ice dams. Snow guards are worth adding above entryways. A coating every 10 to 15 years can extend the life of older panels. Call us for a free inspection if you are unsure.
Why choose us?

Trusted professionals in Columbus

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Columbus

All your work handled by qualified professionals in Columbus

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

217+ Verified Client Reviews in Columbus

⭐⭐⭐⭐⭐ 4.9/5 · 217 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Columbus · Response within 24h · No commitment · ☎ (380) 800-5621

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Columbus ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm