Serving the Columbus area  ·  (380) 800-5621  ·  Open Mon-Sun 7am-7pm
📞 (380) 800-5621 Free Quote

Metal Roofing in Columbus, OH (43201) · Local Professionals

Columbus Metal Roofing · Fast response in Columbus and the Columbus area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+217Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Columbus is a city of old brick and new shingle, where German Village slate roofs sit a few miles from Dublin's 1990s subdivisions. The housing stock here runs from 1880s Italianate row homes to post-war Cape Cods in the Hilltop, and each one takes a beating from Ohio's freeze-thaw cycles, spring hail, and wet leaf-filled falls.

Homeowners in ZIP 43201 call Columbus Metal Roofing because we know the difference between a Clintonville Tudor's steep gable and a Northland ranch's low pitch. We are based here, we work here, and we have seen what a Scioto River valley winter does to fasteners and flashing.

Metal Roofing in Columbus (43201)

Columbus sits on a flat glacial till plain, which sounds simple until you are working on a narrow lot in Victorian Village with a slate roof that has been patched six ways since the 1920s. The ground here drains slowly after a spring storm, and that matters for roof runoff and gutter sizing. In Bexley and Upper Arlington, the steep gabled roofs and mature oaks mean leaf debris fills valleys and clogs downspouts every fall. Out in Hilliard and Gahanna, the newer subdivisions have architectural shingles that are now 20 to 30 years old and starting to fail at the fasteners, especially after a hail event. We handle standing seam, metal shingle, stone-coated steel, and copper for porches and bays, and we know how to match a panel profile to a historic district review board or an HOA color palette.

Our crews are fully insured with general liability and workers' compensation, and we have been working Columbus roofs long enough to know which neighborhoods need a permit pulled before the first panel comes off.

Our services in Columbus

How a Job Works in Columbus

Step 1: You call (380) 800-5621 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and we walk the roof with you. We check for active leaks, separated seams, loose fasteners, and flashing gaps, and we look at the attic ventilation and deck condition if accessible. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required permit through the local building department (rules vary by jurisdiction, so we verify thresholds and inspection requirements for your address). For tight lots in the Short North or German Village, we stage materials in the driveway or on the street per city rules, and we coordinate with HOA design review if your subdivision requires it. Our crews remove the old roofing, inspect and repair the deck, and install the new metal roof with manufacturer-specified fasteners and flashing.

Step 3: We clean the gutters, magnet-sweep the lawn and walkways for nails, and haul away all debris. You get a final walkthrough, and we do not leave until you have seen the finished work and we have confirmed the site is clean.

Pricing in Columbus depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. A full replacement on a typical 1,800-square-foot Columbus ranch usually lands in the low five figures, while a small leak repair is often a few hundred dollars. We give you a written estimate for free, so call (380) 800-5621 and we will talk through your roof.

My Clintonville Tudor has a steep gable and old slate, can you match a metal roof to that look?
Yes. We install metal shingle and stone-coated steel profiles that mimic slate or shake, which suits the 1910s-1940s Tudors and Colonials in Clintonville, Bexley, and Grandview Heights. We can also do standing seam if you want a more modern look, and we will walk you through color and profile options that fit the neighborhood.
A storm just peeled back panels on my roof in the Northland, how fast can you respond?
Call (380) 800-5621 and we will schedule an inspection as soon as possible, often same day for active leaks or wind damage. We document the damage for your insurance claim, make temporary repairs if needed, and give you a written scope for permanent repairs. We never promise coverage, but we do provide the documentation your adjuster will ask for.
What does a typical metal roof replacement cost in Columbus?
For a 1,500 to 2,000 square foot home, replacement typically starts around $9 per square foot, so most jobs land between $13,000 and $20,000 depending on pitch, access, and whether we remove existing layers. A retrofit over shingles starts at $7 per square foot. Small repairs start at $450. We give free written estimates, so call (380) 800-5621 for a number for your specific roof.
Do I need a permit for a metal roof in Columbus?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds, fees, and inspection requirements vary by jurisdiction. We verify the rules with the local building department before we start, and you can also check the City of Columbus website for general information. We handle the permit process for you as part of the job.
My HOA requires a specific roof color, can you help with approval?
Yes. Many subdivisions in Dublin, Hilliard, Westerville, and New Albany have design review for panel profile and color. We provide product samples and specification sheets for your HOA submission, and we can adjust the panel type or finish to meet the guidelines. We also check property line setbacks if your roof drains toward a neighbor.
Are you insured for work on my Columbus property?
Yes, we are fully insured with general liability and workers' compensation coverage. If you have questions about coverage, call (380) 800-5621.
What maintenance does a metal roof need in Columbus winters?
Ice dams and freeze-thaw cycles are the main issue here. We recommend clearing leaves from valleys and gutters every fall, checking fasteners and flashing each spring, and adding snow guards on steep roofs or above entryways. A coating every 10 to 15 years can extend the life of an older metal roof. We offer inspections and maintenance plans, so call (380) 800-5621 to schedule.
Why choose us?

Trusted professionals in Columbus

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Columbus

All your work handled by qualified professionals in Columbus

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

217+ Verified Client Reviews in Columbus

⭐⭐⭐⭐⭐ 4.9/5 · 217 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Columbus · Response within 24h · No commitment · ☎ (380) 800-5621

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Columbus ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm